Forum archiveWorkshop Manual
This is a read-only archive of the ST70.net forum (2009–2021). Posting, accounts and private messages are no longer available.

Cf parts please

Started by grahamd · 6 replies · 33 views

grahamdStandard MemberPosts: 107
Joined: Aug 2011
Standby for a long list :lol:

I'm looking for the following;

Ignition switch (any model, st or cf, I'll make it fit!!!!) Now have one (ok its an ST, but hey, its a switch)
Headlight (round or square)
speedometer
chain guard
kick start (I think mine has the wrong one)
Engine bolts (the ones that go through the frame to hold the engine in)
Rear swinging arm (not happy with the slop)


Probably think of more later :cry:
Last edited by grahamd on Wed Aug 10, 2011 5:00 pm, edited 1 time in total.
TUFTYNUTKINStandard MemberPosts: 456
Joined: Mar 2009
Re: Cf parts please
Hiya
Just replace the bushes in the rear swing arm its about a tenner from any of the minibike outlets IE OOracing but if you are loath to do this you could buy a second hand swing arm from me and have the same problem as most swing arms will be 30 years plus
Tufty
grahamdStandard MemberPosts: 107
Joined: Aug 2011
Re: Cf parts please
I did look at the parts drawing of the swing arm and I couldnt see the bushes as removable ?



And didnt see them listed on web sites, so are these something not listed, normally most (larger) bikes have them listed on the parts diagram as a spare part.
Do you know the part number ?
JamesModeratorPosts: 423
Joined: Feb 2009
Re: Cf parts please
You will have to get someone to press them out as they are hard to get out. I tried and gave up in the end (my swingarm wasn't sloppy anyway).
grahamdStandard MemberPosts: 107
Joined: Aug 2011
Re: Cf parts please
James wrote:You will have to get someone to press them out as they are hard to get out. I tried and gave up in the end (my swingarm wasn't sloppy anyway).
Thats no problem, I can use the farm fly-press, but where and who does them ?

‹ Back to Wanted