Dax ST70 Wiring problems

Good evening guys.

I'm in the final stages of restoring my 1995 12V ST70 Dax. I'm pretty competent wiring vehicles as I use to be a mechanic so I know my way around a wring diagram.

I've just spent 3 hours trying to wire my dax using the following Diagram

https://1drv.ms/u/s!AjXBp7yX_7mPgaBo7ltf102p4Nqsxw

All was going well but towards the end I just kept comming across small differences and couldnt go any futher.

The wires I have are

Main loom:
Yellow
Brown
Green (4 sockets)
Green (2 sockets)
Green/red
Black (3 sockets)
Grey
Orange
Light blue
Green/yellow

Lighting hi Low switch/turn https://1drv.ms/u/s!AjXBp7yX_7mPgaB_JiRNCJ7jpy1hDg

Light blue (3 sockets)
Orange (3 sockets)
Blue
Black
Blue/white
Green (with small rectangles on it)
White (with small rectangles on it)
Grey

The other lighting switch HL-P-O https://1drv.ms/u/s!AjXBp7yX_7mPgaEA4LHZie28rYKd9g

Brown
Brown/White
Blue/white
Yellow

I've searched high and low and I can not find any wiring diagrams to match mine. Which I believe is an original loom!

Any help would be much appreciated.

Chris