kvikgrip68Standard MemberPosts: 5
Joined: Mar 2016
Joined: Mar 2016
Hi folks
Have a problem after renewing min piston , cylinder (which is standard 70 cc - 47 mm) and the camshaft chain with all sprockets and guide rollers ....
It wont hold the slow idle ...... when taking the gashandle it rews with some sputtering sounds in the exhaust and the idle adjusting screw is all the way in just to keep it going .....
timing is adjusted ok .... platins is okay ....
any suggestions for bad idle ?
regs
Have a problem after renewing min piston , cylinder (which is standard 70 cc - 47 mm) and the camshaft chain with all sprockets and guide rollers ....
It wont hold the slow idle ...... when taking the gashandle it rews with some sputtering sounds in the exhaust and the idle adjusting screw is all the way in just to keep it going .....
timing is adjusted ok .... platins is okay ....
any suggestions for bad idle ?
regs