Speedo bezel and lens removal

Anybody know how to remove the lens and bezel from an original speedometer unit? I have seen this on flea bay http://pages.ebay.com/link/?nav=item.vi ... ID=EBAY-GB and mine is a little rusty.

Carefully pry it up. To reinstall, reverse the procedure. There's a fellow that did it on a CT90 speedo and the procedure is the same.

http://hondatrailcts.yuku.com/topic/629 ... rLgX-bgrDM

To pry the ring up make yourself this from some 6mm bar. I filed a semicircle with a small round file and cut 45 degrees from the back. This will slowly lift (take a couple of goes around) the edge and allow you to get the ring off. 🖼 Enfield 9-F2tr 147.JPG (photo damaged in backup) 🖼 Enfield 9-F2tr 147.JPG (photo damaged in backup)

NIce one Murdo, I have been told elsewhere to take great care as original speedos are rare as rocking horse $hit! So I may try and treat before removing.