Forum archiveWorkshop Manual
This is a read-only archive of the ST70.net forum (2009–2021). Posting, accounts and private messages are no longer available.

st50 loom

Started by mitchkay · 5 replies · 3219 views

mitchkayStandard MemberPosts: 10
Joined: Nov 2014
hi im restoring a st50 6v and need a wireloom. is the ss50 wire loom the same or is anyone selling a full loom
mitchkayStandard MemberPosts: 10
Joined: Nov 2014
Thanks are all the lights and switches the same
WaynusModeratorPosts: 1108
Joined: Feb 2009
No, there even are like 4 different versions of the ST50 headlight switch...
mitchkayStandard MemberPosts: 10
Joined: Nov 2014
Ok thanks can you wire an ss50 engine into the st50 loom please
Brian ReadStandard MemberPosts: 165
Joined: Sep 2012
Hi Mitch
I converted my pile-o'-bits 6v ST70 into a 12v 125 so the original loom is surplus to requirements. The original ST stuff came with the detachable ignition switch section with the key and turned out to be a 3 position switch as used on some non-UK bikes that needed a parking light position.
If you're still looking for a loom I can send you some pics as a PM of what I've got which all seem to be in serviceable condition apart from being a bit grubby.
I can also send you a wiring diagram but you'd need to check the loom against the drawings to make sure you end up with the correct connections.
Hope this helps - you could give me a call on *****.

‹ Back to Technical